MAX-E1 TEFC SS Low Voltage Normal Thrust with "P" Base

Totally Enclosed Fan Cooled, [EPV_P]

HP7.5 hp through 100 hp Speed3600, 1800, 1200 RPM Voltage230/460V Frequency60 Hz.


  • Three Phase, 60 Hz, 1.15 Service Factor (Continuous); 50 Hz, 1.0 Service Factor (Continuous)
  • CSA Certified for Class I, Div. 2, Groups B, C, D - Temp Code T3 Maximum
  • Class F Insulation
  • Class B Temperature Rise
  • NEMA Design B Torques
  • Cast Iron Frame, End Brackets, Fan Cover, Drip Cover and Main Conduit Box
  • Grounding Terminal Inside Main Conduit Box
  • Oversized Main Conduit Box Rotatable in 90 Degree Increments - F1 Mounted
  • Designed for 40˚C Ambient Temperature(2)
  • Designed for 3300 ft. Elevation(3)
  • Bi-Directional Rotation
  • 1045 Carbon Steel Shaft
  • Aluminum Die Cast Squirrel Cage Rotor Construction
  • Paint System: Phenolic Rust Proof Base Plus Polyurethane Top Coat
  • Paint Color: Light Gray - Munsell N5.0
  • Guide Bearings: 250HP - 400HP Frames are Single Shielded
  • Thrust Bearings: 250HP - 405HP Frames are Re-Greasable Angular Contact with Mobil Polyrex™ EM Grease
  • Automatic Grease Discharge Fittings on Regreasable Models
  • Labyrinth Type Metal Flinger on Both Ends for Frames 320HP & Larger
  • Cast Iron Inner and Outer Bearing Caps for Frames 280TS & Larger
  • Stainless Steel Nameplate
  • New Dual Column Design Nameplate as Standard (60/50 Hz)
  • Suitable for Inverter Duty (PWM - Pulse Width Modulation) per NEMA MG-1, Part 304,5
  • Inverter Duty Speed Range: 20:1 Variable Torque, 10:1 Constant Torque
  • 12 Leads
  • Dual Drilled Feet Available on Most Ratings - Longer Frames (i.e. 145T Drilled also for 143T)
  • Rubber Dust Flinger on Drive-End for F# 140HP - 280 HP